SUBMERSIBLE PUMP
PUMPS INSTALLATION APPLICATIONS
Type deep-well pump is mainly composed by three parts:
pump mechanical seals and motor.Pump is at the upper
part of motor pump. which comsists by stator and rotator.
Motor is at the lower part of motor pump and is a single-phase or three-phase lower part of motor pump andis a single-phase
is between pump and motor and it is a kind of double
endmechanical seal"O" rings are applied in all static
joints of the submersible pump.lnner-installed protector
prevenbts the pump from damage due to abnormal power,
clog and overload etc.

OPERATING CONDITIONS
PH value:6-8.5 Diameter of contained particle should
be less than 2mm volume ratio of mixed sandy soil
should be less than 3% Liquid tem perature up to 40℃
the depth or the pump under water must be less than
15m.

MOTOR
2-pole induction motor 50Hz Single-phase220V+10%
with thermal protector capacitor inside the terminal box
three-phase 230/400V+10% insulation class B  Protecton
IP68. 110V60Hz is also available.